A SERVICE OF

logo

PAGE 54/58
119078.01 TELEPRESENCE T3 SYSTEM ASSEMBLY 12.08
TANDBE RG
Telepresence T3
11. Unscrew the screws holding the brackets (marked in orange in picture be-
low) in the left column.
12. Find the TCU in the box marked ’T3 Telepresence kit w/ TCU & screens’ and
fasten the TCU to the left column, using the bracket and the same screws as
were just loosened. (The TCU is marked in green in the picture below). Con-
nect the cables to the TCU.
M OUN TI NG T HE TC U
Tip! Put on the rubber legs on the units
before they are mounted. Otherwise
you will not be able to fasten the screws
completely!