A SERVICE OF

logo

PAGE 55/58
119078.01 TELEPRESENCE T3 SYSTEM ASSEMBLY 12.08
TANDBE RG
Telepresence T3
13. Unscrew the screws holding the bracket in the right Column. Switch on the
Presentation input switch before mounting. Make sure the DIP switch is set
correctly: 1: On, 2: Off, 3: On, 4: On, 5: On, 6: Off, 7: Off, 8: Off
Fasten it in the same manner as the TCU was fastened.
14. Place the cover plates left and right on top of the floor structure.
M OUN TI NG T HE TC U