Tascam MMP-16 Owner’s Manual • Appendix D • Cable Information
TRANSPORT (Sony 9-pin) Connector pinout
PIN # MSTR Signal SLAVE Signal Pin # MSTR Signal SLAVE Signal
1 Frame ground Frame ground 6 Frame ground Frame ground
2 Receive - Transmit - 7 Receive + Transmit +
3 Transmit + Receive + 8 Transmit - Receive -
4 Frame ground Frame ground 9 Frame ground Frame ground
5 Spare Fr Ck Spare Fr Ck
NOTES:
1. 9-pin D-subminiature female connector (DB-9).
2. Signals are RS422 Compatible Frame Clock spare should not be used.
3. The two connectors allow parallel connection of the Lynx Bus. Each pin is
paralleled internally between the two connectors. The signal description
indicates master / slave signals.
4. Signal Descriptions are MMR Output / Transport (Input). Signals are of
Protocol-2 (P-2) standard, which is also known as Sony 9-pin
