A SERVICE OF

logo

GB
34
Message E3 in the control
Inadequate cookware due to
its poor magnetic qualities.
This error message disap-
pears after eight seconds.
Otherwise, call Technical
Support.
When cooking at a level below 9, there will be fluctuations
in the power
The induction generator of
the cooker turns on and off
alternately in order to keep
the chosen cooking level.
This is not a defect.
ONLY MODELS ...604:
Excess temperature pro-
blems during cooking only
occur in extreme situations
(an extended period of time
cooking at maximum power)
or when installation is ina-
dequate.
Verify that installation has
been done in accordance
with the indications in the
instructions manual.
If an induction element goes off and the message E2 appears
Overheating of the electronics.
Fault Possible cause Possible solution
MODELS ...640 AND ...644
Continuous beeping, touch control disabled and appears on the displays
There is an object or some
liquid on top of the touch
control.
Remove any object or liquid
covering the touch control.