Auth Mode:
You can select the proper Active mode according to your need.
Manual: Select this option to manually activate or terminate the
Internet connection by the <Connect> or <Disconnect> button.
It’s optimum for the dial-up connection charged on time.
Always-on: Select this option to keep the connection always on.
The connection can be re-established automatically when it is
down.
MTU:
MTU (Maximum Transmission Unit) is the maximum data unit
transmitted by the physical network. It can be set in the range of
576-1500. The default MTU is 1500.
Bandwidth:
Specify the Upstream/Downstream Bandwidth for the port. To make
"Load Balance" and "Bandwidth Control" take effect, pl
these parameters correctly.
BigPond Status
Status:
Displays the status of BigPond connection.
“Disabled” indicates that the BigPond connection type is not
applied.
“Connecting” indicates that the rout
parameters from your ISP.
“Connected” indicates that the r
obtained the IP parameters from your ISP.
“Disconnected”
indicates that the connection has been
manually terminated or the request of the r
response from your ISP. Please ensure that your settings are
correct and your network is connected well. Consult your ISP if
this problem remains.
IP Address:
Displays the IP address assigned by your ISP.
Subnet Mask:
Displays the Subnet Mask assigned by your ISP.
Default Gateway:
Displays the IP address of the default gateway assigned by your
ISP.
-27-
