A SERVICE OF

logo

Open as PDF
next previous
TL-WR740N/TL-WR741ND 150Mbps Wireless N Router
-22-
Step 4. Wait for a while until the next screen appears. Click Finish to complete the QSS
configuration.
The QSS Configuration Screen of Wireless Adapter
II. By PIN
If the new device supports Wi-Fi Protected Setup and the PIN method, you can add it to the
network by PIN with the following two methods.
Method One: Enter the PIN into my Router
Step 1. Keep the default QSS Status as Enabled and click the Add device button in Figure 4-2,
then the following screen will appear
.
Step 2. Choose Enter the new device's PIN and enter the PIN code of the wireless adapter in
the field behind PIN in the above figure. Then click Connect.
) Note:
The PIN code of the adapter is always displayed on the QSS configuration screen