TL-WR740N/TL-WR741ND 150Mbps Wireless N Router
-77-
4.13.2 Rules List
Choose menu “Bandwidth Control → Rules List”, and then you can view and configure the
Bandwidth Control rules in the screen below.
Figure 4-80 Bandwidth Control Rules List
¾ Description - This is the information about the rules such as address range.
¾ Egress bandwidth - This field displays the max and mix upload bandwidth through the WAN
port, the default is 0.
¾ Ingress bandwidth - This field displays the max and mix download bandwidth through the
WAN port, the default is 0.
¾ Enable - This displays the status of the rule.
¾ Modify - Click Modify to edit the rule. Click Delete to delete the rule.
To add/modify a Bandwidth Control rule, follow the steps below.
1. Click Add New… shown in Figure 4-80, you will see a new screen shown in Figure 4-81.
2.
Enter the information like the screen shown below.
Figure 4-81 Bandwidth Control Rule Settings
3. Click the Save button.
