Broadband VPN Gateway User Guide
Data - User Screen
Existing Users
User List
All existing users are listed. If you have not added any users, this list
will be empty.
When a user is selected, their details are displayed in the Properties
panel. You can then edit the user's information as required; click
Update Selected User to save your changes. (If you select another user
before saving your changes, your changes are lost.)
Delete Button
Use this to delete the selected user if required.
Properties
Allow connection
Use this to enable or disable access by this user, as required.
Login Name
Enter the login name. The remote user must provide this name when
they connect. The name must not contain spaces, punctuation, or
special characters.
Login Password
Enter the login password. The remote user must provide this password
when they connect.
Confirm Pass-
word
Re-enter the password above.
Button
Clear Form
Use this to prepare the form for a new entry. Any existing data will be
cleared.
Add New User
Use this to save the data in the "Properties" area as a new entry. (If a
user is selected in the "Existing User" list, the selection is ignored.)
User Update
Use this to update the data for the user selected in the Existing User
list. To change an existing user's data, follow this procedure.
1. Select the desired user in the Existing Users list. Their information
will be displayed in the Properties panel.
2. Change the data in the Properties panel as required.
3. Click the User Update button to save your changes.
108
