20 SPARC Enterprise M4000/M5000 Servers Product Notes for XCP Version 1050 • September 2007
RTIF1-
070914-012
On the XSCF Web, on the SNMP-Properties
screen, when you don't select Trap Host and
execute the Remove button, the invalid
message "The trap host will be removed"
appears as a pop-up. And when you select OK
on the pop-up screen, the invalid message
"Remove trap host failed. setsnmp: invalid
trap type" appears.
None available at this time.
RTIF1-
070914-013
On the XSCF Web, on the Audit-Properties
screen, when you execute the Add Policy
button, the Set User Policy appears as a pop-
up. On this screen, when you specified a user
name which is not registered in XSCF and an
input error resulted, the value entered won't
be cleared though you execute the Reset
button to clear the specified user name.
Set the correct user name or execute the Cancel
button to close the pop-up screen.
RTIF1-
070914-014
On the XSCF Web, when you use a user
account without an appropriate privilege to
select Snapshot, set the parameters of Start
time or End time and execute the Download
button, it doesn't result in a privilege error but
the parameter error will be displayed.
None available at this time.
RTIF1-
070914-015
On the XSCF Web, when you select User
Manager to add the user account, the user
name to be specified is limited up to 20
characters.
To specify a user name of 20 characters or
more, use the adduser(8) command.
RTIF1-
070914-016
On the XSCF Web, when you select LDAP to
perform the LDAP configuration, if you
execute Save while the LDAP Search Timeout
remains as its default value "0," it results in
"LDAP Configuration Update Failed. Save
LDAP Configuration Data failed," and the
setting can't be stored.
Since "0" is an invalid value in the LDAP
Search Timeout, do not fail to set a value other
than 0.
RTIF1-
070914-017
On the XSCF Web, when you select LDAP and
input the LDAP Search Timeout with a value
which exceeds the maximum 2147483647
seconds, it doesn't result in parameter error.
None available at this time. The maximum
2147483647 seconds will be set to the LDAP
Search Timeout.
RTIF1-
070914-018
On the XSCF Web, when you use a user
account without an appropriate privilege to
select LDAP and execute the Delete button, it
results in a privilege error but the
configuration information which has been
displayed will be cleared and seems as if
deleted.
The configuration is not deleted. To show the
configuration information again, select LDAP
from the Menu.
TABLE 5 XCP Issues and Workarounds (Continued)
ID Description Workaround
