EFP9800 ESC/POS Commands
3255 4073– 002 6– 27
Select Head Energizing Time
Selects the head energizing time as specified by n. The head energizing time is
set for the paper type selected using the Select Print Paper(s) command (1B 63
30). (When both receipt/journal paper and slip are selected, the head energizing
mode for slip is enabled.)
This command is effective only at the beginning of a line.
Hexadecimal Decimal ASCII Value of n
1D 45 n 29 69 n GS E n 0 = Slip/Validation
1 = Receipt/Journal Paper
Function Status
Bit Function 0 1
0 Head Energizing Time Slip Receipt/Journal Paper
1-7 Undefined
Set Left Margin
Sets the left margin as specified by n1 and n2. The left margin is calculated by
[(n1 + 256 x n2) x horizontal direction of the fundamental calculation pitch)].
See the Set Fundamental Calculation Pitch command (1D 50).
Hexadecimal Decimal ASCII Value of n
1D 4C n1 n2 29 76 n1 n2 GS L n1 n2 n1 = 0-255
n2 = 0-255
The settings do not apply in page mode.
• The command is valid only at the beginning of a line.
• The left margin is set for the paper that was selected by the Select Paper(s)
for Settings command (1B 63 31).
• If a fraction is part of the result from calculating the left margin, it is
corrected with the remainder being truncated.
• The maximum value of the printable area is used if any setting is greater
than that area.
