Unisys NX5820 Manual

A SERVICE OF

next previous

VX1305 Servers

7017 6300–005 6–9

Configuration Guidelines VX1305

Table 6–7 lists guidelines for configuring VX1305 servers. Figure 6–2 shows the

connection from a VX1305 server to the CIOM card in the CEC module or to the PCI Thru

card in channel racks.

Table 6–7. Configuration Guidelines, VX1305 Servers

Area Rule/Recommendation

Windows NT Connection

Packages

See Table 6–5 for details.

Processor Addition

One additional processor may be added to a maximum of two per server. See

Table 6–3 for details.

Disk Addition

Additional disk may be added to a maximum of three per server. See Table 6–1

for recommendations.

Memory Additions

Three increments of 256 MB can be added to a memory board. See Table 6–4.

PCD Generation

Refer to Appendix B of the A Series and ClearPath HMP NX Systems I/O

Hardware Configuration Guide (7008 6087) for information on PCD

generation.

Serial 1

U

U

K

M

LPT

Ser 2

Ser 1

Vid

LAN

0627A

Serial 2

Server A

7019 7488-001

(CSB3-10C)

Remaining Servers

7019 7488-002

(CSB3-15C)

To CS Bus in CEC or PCI

Thru card in channel racks

Figure 6–2. VX1305 Server CS Bus Cable Connection