VX1505 Servers
7017 6300–005 6–11
Table 6–8. Basic Features, VX1505 Servers
VX1505
Servers
4
Processors
2,3,8
Memory
4
10/100
Mbps LAN
Interface
3.5-Inch
1.44-MB
Floppy
Disk Drive
CD-ROM
Drive
DAT
Tape
Drive
7
RAID
9-GB
Hard Disk Drives
5
Min. Max. Std. Std. Std. Std. Std. Max.
Per Server
1,6,7
1 to 4 0.5-MB 8-GB 2 1 1 0 2 2
Notes:
1. VX1505-BSE includes the basic components listed in Table 6–10. VX1505-BSU contains the
same basic components.
2. VX1505-BSE/-BSU orders required the selection of 1 to 4 of the following:
XER2450-512 Pentium II Xeon CPU, 450-Mhz, 512KB cache
XER2450-1MB Pentium II Xeon CPU, 450-Mhz, 1MB cache
XER2450-2MB Pentium II Xeon CPU, 450-Mhz, 2MB cache
XEO3500-512 Pentium III Xeon CPU, 500-Mhz, 512KB cache
XEO3500-1MB Pentium III Xeon CPU, 500-Mhz, 1MB cache
XEO3500-2MB Pentium III Xeon CPU, 500-Mhz, 2MB cache
XEO3550-512 Pentium III Xeon CPU, 550-Mhz, 512KB cache
XEO3550-1MB Pentium III Xeon CPU, 550-Mhz, 1MB cache
XEO3550-2MB Pentium III Xeon CPU, 550-Mhz, 2MB cache
See Table 6-11
3. All processors with a VX15xx server must be the same style.
4. All VX1505-BSE orders require the selection of the following memory styles (Quantity ordered
must be in increments of four (32 total) and the same type):
DIM5072-128 128MB Memory, EDO, 50ns DIMMs (32 maximum, including
initial)=4.0GB
DIM5072-256 256MB Memory, EDO, 50ns DIMMs (32 maximum, including
initial)=8.0GB
5. Two 9-GB hard disk drives are included with each VX1505-BSE/-BSU package. No additional
drive can be added.
6. A connection package (Table 6-13), optional user access components (Table 6-14), optional
PCT Thru card and software package must be ordered separately.
7. A tape is recommended for back-up. Order the following styles if desired:
PCT12000-DAT 12 GB DAT Tape Drive (Qty. 1)
EXD221-SXR Tape Drawer (Qty. 1. Drawer will accommodate 2 tapes)
CBL2210-OSM 10 foot SCSI Interface Cable (Qty. 1. Cable is used between the
tape and server RAID adapter.)
OSM1000-PRC IEC320 Rack to Rack Power Cord (Qty. 1)
8. One or more voltage regulators, style XEO24001-VRM, are required dependent upon the
number of processors installed. A processor terminator, style XER2400-TRM, is required for
each unused processor slot. See Table 6-9.
9. For additional features and enhancement options, reference server specifications
10. For optional hot-swap redundant power supply order component style QR2000101-RPS
(Qty. 1)
