3301770
CN26 D-SUB 15-pin VGA connector
CN27 5-pin IrDA connector
CN28 TFT LCD connector (DF13-40P-1.25V)
CN29 LCD panel dual-channel 18-bit LVDS/TTL connector, 30 (2x15) pin
header 1.25mm (DF13-30P-1.25V)
CN30 Primary IDE bus connector (44-pin 2.0mm)
CN31 FDC flat type floppy port (one floppy drive only)
CN32 Compact flash storage card socket
The 3301770 is built around a VIA MARK CoreFusion™ chipset which
combines integrated ProSavage4 Graphics with video controller and VIA
VT82C686B PCI to ISA bridge controller. The VIA MARK enables
high-performance graphics features by the 64-bit processing power and the AGP 4X,
32-bit true color rendering, Anisotropic filtering, single-pass multiple textures,
Specular lighting and diffuse shading, MPEG-2 playback, just to name a few.
The built-in ProSavage4 display controller supports both the CRT and LCD display
simultaneously. It offers the resolutions of LCD screen up to 1600 x 1200 pixels,
with 36-bit DSTN/TFT flat panel interface with 256 gray shade support. The
extensive display support for LCD is capable of driving 2-channel 110MHz LVDS
interface with panel power sequencing and hardware suspend/standby control. The
onboard Flash ROM contains both the system BIOS and the VGA BIOS.
Modifications could be done by programming the Flash ROM if necessary.
With a specially designed aluminum heatsink, this board can operate without a
cooling fan at temperatures up to 60° C (140°F) and typically consumes low power
watts while supporting numerous peripherals.
OSes tested and proved compliant include: DOS 6.22, Windows 2000, Windows XP,
Red Hat 9.0, and SuSe 9.0.
1-4
