3301770
system if it cannot find a boot drive among the drives specified in the 1st Boot Device, 2nd
Boot Device, 3rd Boot Device, 4th Boot Device options. The settings are Yes or No.
„
Boot from LAN
This option enables you to utilize the PXE LAN control feature.
„
S.M.A.R.T. for Hard Disks
Self-Monitoring, Analysis and Reporting Technology. This option can help the BIOS to warn
the user of a possible device failure and give the user a chance to back up the device before
the failure actually happens.
The settings are Auto, Disabled, Enabled.
„
BootUp Num-Lock
When this option is selected, Num Lock is turned off when the system is powered on so the
user can use the arrow keys on both the numeric keypad and the keyboard.
„
Floppy Drive Swap
This option allows you to swap the A: and B: floppy drive at the BIOS level without physically
change the drives’ connection.
„
Floppy Drive Seek
This option causes the BIOS to search floppy drives at boot time.
„
PS/2 Mouse Support
When this option is enabled, BIOS supports a PS/2- type mouse.
„
System Keyboard
This option does not specify if a keyboard is attached to the computer. Rather, it specifies if
error messages are displayed if a keyboard is not attached. This option permits you to
configure workstation with no keyboard. The settings are Absent, Present.
„
Primary Display
Select this option to configure the type of monitor attached to the computer. The settings are
Monochrome, Color 40x25,Color 80x25,VGA/PGA/EGA, or Not Install.
„
Password Check
To set the system to ask for a password every time it boots.
„
Boot To OS/2
Set this option to Enabled if running OS/2 operating system and using more than 64MB of
system memory on the motherboard. The settings are Disabled or Enabled.
„
L1 Cache
This option can be used to enable or disable the CPU’s L1 cache. The default is Enabled.
4-8
