A SERVICE OF

logo

Open as PDF
next previous
14
5
System Connection
VCR, Stereo, VCD, DVD Player
Video:PleaseuseS-VideoastherstpriorityforVideoinput,thushavinga
betterimagequality.Machinesinearlydays,however,donotsupportS-Video;
thesedevicesonlyhaveVideoforoutput.PleaseattachtheVideooutputcable
tothemachine’svideoinput.IfyouattachtheS-VideoandVideo
outputcabletothemachine,themachinewilluseS-Videoastherstpriority
forvideoinputandatthismoment,thevideoinputforVideowillnottakeany
effect.
Audio:Toleftaudioinput(White)
To right audio input (Red)
DVD, Satellite, Cable etc.
Input video and Audio signal to the monitor.
Video:TomachineYimageinput(Green)
TomachinePb/Cbimageinput(Blue)
TomachinePr/Crimageinput(Red)
Audio:Toleftaudioinput(White)
To right audio input (Red)
Use the Remote control or Machine front "Input" key to
select the Input source to AV1 IN or AV2 IN
Use the Remote control or Machine front "Input" key to select
the Input source to COMP1 IN or COMP2IN
If you are already using the COMP1 IN input for another
component, or you do not want to use the COMP1 IN input
fortheDVDplayer,youcanconnecttheDVDplayertothe
COMP2INgroupofconnections.
RefertoyourDVDplayerusermanualformoreinformation
about the video output requirements of the product.
Stereo amplifier
Speaker System
These terminals are used
for connecting a stereo
amplierforDigitalTV
Audio Signals only. They
relay(pass-through)the
audiosignalsofallDTV
programs displayed on the
RPTVscreen.
Rear Connector - 1