A SERVICE OF

logo

Open as PDF
next previous
19
How to use OSD
8
Before use OSD, You must know:
Recommended ways to learn about operations
Before starting, please follow the suggested steps to understand the fundamentals of operating the display,
and then you will be able to learn the operations in a short time:
1.Pleaserstlearntopoweronandpoweroffthedisplay.Refertopage18forthedescriptionsofthe
operations.
2.PleaselearnhowtooperatetheOSD.
3.UnderstandwhateachOSDmenuis.Refertopage20~28foranexplanationofthe
OSDcontents.
Example how to select correct input signal source.
Afterpoweronthedisplay,rststep:youneedtoselectthecorrectinputsignalsource.Thescreenwillbe
blank without any images with incorrect input signal source. Follow the steps to set up:
1.UseOSDtoselectthecorrectinputsource,pressthe
MENUkeyandbringuptheOSDmenu.
2.Use▲▼keystoselectthe“INPUTSETUP”option,pressOKtoenterthesubmenu.
Press OK to enter the Submenu
3.ThentheOSDwillshowtheSubmenuasbelow:
FollowtheOSD'sindicatetooperatetheOSD.
Forexample:
1.Use
▲▼ key to select the item "Main Input" , "PIP
INPUT"or"INPUTSIGNAL"
2.thenuseOK to enter the item that you select.
eg: use ▲▼ to select MAIN INPUT, press ok then use
◄ ►toselectinputsourceTV,DTV....
3.Ifyouwanttoexitthesubmenu,pressEXIT on remote
control to main menu or MenukeytoexitOSD.
4.Press OK , then press
◄ ► to
change
the main input source, last pressOK again to
exitthismaininputsetup.
5.Now you understand:
Just to press the MENUkeytoshowtheOSD
AndfollowtheOSDbuttomline'sinformationtooperattheOSD.SoyouonlyneedMENU, EXIT , OK,
▲▼ ◄► , ENTER thesekeystocontrolthewholeOSD.
If you still have any question, please call our service center to help you.
Quick Input Source select way
For Main Input
Press the INPUT key in the front control panel or remote control repeatedly, the input signal mode will appear on
thetopleftcorner,pleaseselectcorrectinputsignalmode.(RefertoInputrelativepage13~15,24)
COMP1
For PIP Input
Pleaserefertopage24.