A SERVICE OF

logo

10
Remove burner control knobs, control panel
and front panel
Remove the burner control knobs. The control panel is
separate from the front panel. The control panel needs to
be removed before the front panel can be removed.
Figure 19.
Figure 19
Control
panel
Front
panel
CHECK FOR GAS LEAKS
WARNING
The gas connections of your Weber Gas
Barbecue have been factory tested. We do
h ow ever recommend that you leak ch e ck all
gas connections before operating yo u r
Weber Gas Barbecue.
Front edge of the
control panel
Put your fingers under the front edge of the control panel,
lift up, and pull evenly toward you. Figure 20 (a).
Figure 20
(a)
Front Panel
Control Panel
INSTALL CONDIMENT
HOLDERS AND WORK
SURFACES
You will need: two condiment holders and two stainless
steel work surfaces.
Place the condiment holders on the ends of the frame.
Set the work surfaces on top of the condiment holders
and the barbecue frame. Figure 18.
Figure 18