8
INSTALL WARM-UP
BASKET
Figure 11
You will need: warm-up basket.
Install one end of the warm-up basket into the hole on the
right end of the lid and the other end into the slot in the
left end of the lid. Figure 11 (a).
a)
INSTALL BOTTOM TRAY
You will need: Bottom tray, catch pan holder, catch pan,
and one drip pan.
Figure 13
Figure 14
Note: It may be easier to install the catch pan holder by
removing the catch pan from the holder.
Hook the ends of the catch pan holder into the hole in the
bottom tray. Figure 14.
Figure 15
Slide the bottom tray into the mounting slots under the
bottom of the cooking box with the finger grip of the catch
pan toward you. Figure 15.
CAUTION: Do not line the bottom tray with aluminum
foil. It can cause grease fires by trapping the grease
and not allowing grease to flow into the catch pan.
INSTALL BURNER
CONTROL KNOBS
Figure 12
You will need: four (Summit 425 or 450) or six
(Summit 625 or 650) burner control knobs.
Push on the burner control knobs. Figure 12.
