Weber 625 Manual

next previous

ADD COOKING MODULE

Figure 2

Figure 3

Caution: Use two people to lift and install the

cooking module.

Lift the cooking module out of the packaging. The gas

line, regulator, and bracket will hang below the module.

Lower the module on an angle into the cart so the control

panel is under the front top frame rail. Figure 2. Guide the

gas line regulator and bracket while lowering the module

into the cart.

Lower the back of the cooking module down so it is

between the two flanges in the back panel. Figure 3.

Use caution not to scratch the paint of the cooking

module when setting the module between the flanges.

The cooking module should be level, setting on the front

and rear top frame rails.

Front top

frame rail

Rear top

frame rail

View from

right

View from

right

Stainless steel work surface (2)

Condiment holder (2)

Tool holder (4)

Hose

REMOVE PACKAGED

CONTENTS (CONTINUED)

Wire bottom rack

(For Summit 450 and 650)

Stainless steel bottom shelves

(For Summit 425 and 625)

Flange

Drip pan

Catch pan

Catch pan holder