10-28 Optionsbb __________________________________________
Bank 0/0 16 MB 16 MB 64 MB 64 MB 64 MB
Bank 0/1 16 MB 16 MB 64 MB 64 MB 64 MB
Bank 1/0 16 MB 16 MB 64 MB
Bank 1/1 16 MB 16 MB 64 MB
Total RAM 32 MB 64 MB 128 MB 160 MB 256 MB
The following are SODIMM specifications for you printer.
Note: If you purchase SODIMMs from a vendor other than
XANTÉ, you should test the RAM before purchasing
large quantities. XANTÉ tests show some vendor’s
RAM, manufactured to specifications, is incompatible
with our printers. XANTÉ cannot guarantee the
performance of RAM sold by other vendors.
Common Specification for all Densities
Module type: 72-pin SODIMM
Organization: x32
Parity: none
Power voltage: 3.3V
I/O voltage: 3.3V tolerant
Speed: 60 ns or better
Mode: EDO
Refresh: CAS before RAS
Contact: gold
Dimension: 2.3" (length) x 1.5" (max height)
Supported Densities and Organizations
Density Org Config RAS/CAS Quantity
Addressing
16 MB 4M x 32 4M x 4 bit 11/11 8
64 MB 16M x 32 4M x 4 bit 12/12 8
