Remote control
31
English
Ⅵ Changing selections
Refer to the display panel or the monitor screen when changing the selections.
When using the remote controller, set the
PARAMETER/SET MENU switch to the SET MENU
position.
Note: The cover of the remote controller must be open.
1 Turn on the power of this unit. (If necessary, turn on the
power of the monitor to display information.)
2 Select the function “1. CENTER SPEAKER” by using
one of the following methods.
3 Use one of the buttons figured below to select the
desired position.
4 Follow the same procedure for “2. REAR SPEAKER”,
“3. MAIN SPEAKER”, “4. LFE/BASS OUT” and/or
“5. MAIN LEVEL”.
First select the function by following step 2, and then
select the proper position by following step 3.
Front panel
Remote control
