72
REMOTE CONTROLLER
Macro operations (Cover is closed)
The Macro feature makes it possible to operate a series of
functions by pressing just one key. For example, when you want
to play a CD, normally you would turn on the equipment, select
the CD input, and press the play key to start playback. Using the
Macro feature you can operate all those functions by simply
pressing the CD macro key. The preset macro keys (the input
selector keys and SYSTEM POWER ON/STANDBY keys with an
orange mark next to them) are preset with macro programs.
If you prefer, however, you can change the contents of a
macro key by storing a desired series of functions on it. You
can store up to seven functions onto a macro key. (Refer to
page 75 for making a new macro.)
Macros can be used only when the cover is closed and the
MACRO switch is set to “SLOW” or “QUICK”. (If “OFF” is
selected, no macro will function even if the cover is closed.)
Setting the MACRO switch
OFF: In this position, no macro will function even if the
cover of the remote controller is closed.
QUICK: In this position, when a macro key is pressed, each
command is transmitted at 0.5 second intervals.
SLOW: In this position, when a macro key is pressed, each
command is transmitted at 3 second intervals.
