43
English
Tuning
BASIC OPERATION
1 Select “TUNER” as the input source.
2 Select the reception band. “FM” or “AM” will be
illuminated.
3
4 Tune to the desired station manually.
* Hold down the button to continue the tuning search.
1 Select “TUNER” as the input source.
2 Select the reception band. “FM” or “AM” will be
illuminated.
3
4 Press the “UP” side once to tune in to a higher
frequency.
Press the “DOWN” side once to tune in to a lower
frequency.
* Press the button again if the tuning search does not stop at
the correct station.
* Use manual tuning if the tuning search does not stop at the
correct station because the signals are weak.
Quick automatic-search tuning (automatic tuning) is effective when the station signals are strong with no interference. However,
manual tuning can be used during less-than-ideal conditions.
Note
Manually selecting an FM station will automatically change the
reception to monaural to increase the signal quality.
Ⅵ Automatic tuning Ⅵ Manual tuning
