A SERVICE OF

logo

Open as PDF
next previous
Chapter 9 LAN
EMG1302-R10A User’s Guide
93
9.4 LAN IP Screen
Use this screen to change the IP address for your EMG1302-R10A. Click Configuration >
Network > LAN > IP.
Figure 50 Configuration > Network > LAN > IP
The following table describes the labels in this screen.
Table 32 Configuration > Network > LAN > IP
LABEL DESCRIPTION
IP Address Type the IP address of your EMG1302-R10A in dotted decimal notation.
IP Subnet Mask The subnet mask specifies the network number portion of an IP address. Your
EMG1302-R10A will automatically calculate the subnet mask based on the IP address
that you assign. Unless you are implementing subnetting, use the subnet mask
computed by the EMG1302-R10A.
Apply Click Apply to save your changes back to the EMG1302-R10A.
Cancel Click Cancel to begin configuring this screen afresh.