Filter
Top Products
Chapter 3 Getting Started
© 2009, ATI Applied Technology, LLC. All rights reserved. Prepared in the United States of America. QuickPhones is a trademark of ATI Applied Technology,
LLC, in the United States and/or other countries.
7
After connecting to the wireless network’s access point, the setup wizard proceeds to the Create
SIP Profile step. See “Setting the SIP Profile” below.
(For more information, see “WPS Registration” on page 20.)
(AP Setup Method 2) Using PIN Mode WPS
To setup using PIN mode, press the PIN Mode soft key shown in step 2 above.
1. Get the PIN code from the phone’s display, and enter it at your wireless access point. Refer to the
documentation for your wireless access point for instructions on entering the PIN code.
2. Press the Ok soft key. The phone displays the following screen:
3. Press the Select soft key.
4. After connecting to the wireless network’s access point, the setup wizard proceeds to the Create SIP
Profile step. See “Setting the SIP Profile” below.
5. (For more information, see “WPS Registration” on page 20.)
(AP Setup Method 3) Manual Setup
To setup manually, press the Manual soft key shown in step 2 above.
1. The phone starts searching for an AP.
2. The phone displays the available networks. Use the navigation key to scroll to
highlight your AP, and press the Select soft key.