Filter
Top Products
Software Version Review (F26)
This feature permits you to review the software version
which is installed in your phone.
1. PressG~@3. 1- -
Backlight Control (In-Use) (F22-2)
For ease of operation, you may select to have the back-
light always on while you are engaged in a conversation.
When this feature is set to the "ALWAYS ON" mode, the
backlight is turned on as long as the call is connected.
1. Press G ~ ~ ' and B~CKLIGHT F22
IIt "IN-USE" CONTROL
scro o .
[1:ST~NDBY
I 2~~~ ..
2. Press G .rB~CKLIGHT F22
1IN-USE rVI~[.]~~~r~l. ..
~LW~YS O~
rVE-RSION
:;;2 6
O 1.~3
OK~
2. Press
j to exit.
Last Rescan SIC Indicator (F27)
This menu item permits you to view the System Identi-
fication number (SID), which your phone is currently
using.
J
O to "NORMAL" or "AL-
3. Scroll with O or
WAYS ON".
4. Press ~ to set.
.3@~
Press
2. Press
F~ to exit.
Volume and Tone Controls
Alert Tone Volume Control (F31 )
This feature allows you to adjust the ringer/melody vol-
ume. The following adjustment will also change the
sound volume of Clock Alarm and Countdown Timer .
1. Press G ~ cD .
[ RIN'YOLUME-
~ II
2. Keep pressing O or O until you get the de-
4.;f6
57J
3. Press \. Fj to set.
SMS Text Lines Selection (F24)
You can select to have Text Messages displayed in ei.
ther 3 or 4 lines.
Contrast Control (F25)
The LCD display contrast can be adjusted in 7 steps for
your best condition.
sired sound level, or "silent" mode.
Note: In "silent" alert mode, alert tone is not given for
an incoming call. Howevel; if Automatic Answer-
ing feature is ON, alert tone is given with the
lowest available volume.