Filter
Top Products
System Features
2. The clock alarm does not ring during power
off; but this feature will be activated again
when you turn the power on.
3. The clock alarm may not ring in AUTO mode,
if you skip the alarm time traveling into an
area with the different local time.
4. See Alert Tone Volume Control (F31) on
page 57 to change the alarm sound volume.
5 In place of the alarm sound, you can use
Vibrator Alert (F8) on page 75.
~
!
I
!
,
A/B System Selection (F51 )
This feature permits you to select which Cellular sys-
tem (A or B) your phone uses. When you turn the phone
on, it remembers the last A/B setting and will scan the
radio channels based on that setting.
Leave this setting as it has been preprogrammed un-
less you have a reason to alter the system selection.
To alter the system selection:
1. Press
G.9 <0 .
~ /B FSi .SWITCH
The current mode will be ~V~l Lro~~1 ~
displayed. ~ HOME ONL y
2. You can change the current mode by O or O .
3. Press G to set.
.AUTO ROAM -Auto Roam Mode
The phone will scan the priority systems first, and then
non-priority systems. For more information as to how
this mode works, see Enhanced Roaming below.
.HOME ONLY- Home Only Mode
You can place or receive calls only within your home
area or home affiliated area.
.A-ONLY- A-System Only Mode
The phone will scan the A-system only and prevents
switching over to the B-system.
.B-ONLY- B-System Only Mode
The phone will scan the B-system only.
Note: If your LCD displays "AUTO ROAM ONLY", your
phone has been pre-programmed to operate in
the Auto Roam Mode only.
Countdown Timer (F45)
This feature alerts you when the countdown timer ex-
pires. The timer can be set to 1 through 99 minutes.
To Start the Countdown Timer
1. Press G ~ ~ .
~ .D. TIMER F4S
2. Enter the duration, 1 to 99 00.
minutes. ~
3. Press G to start. The ~ indicator will be dis-
played.
~I . 1111 e)(f"~
4. When the timer expires, T I M E.'~
the alarm will ring for one «(~
minute with animation.
5. Press any key to stop ringing.
To Cancel the Countdown Timer
1. Press G ~ ~ again after the timer has
started.
2. "TIMER STOP?" is dis-
~
IMER F4S
I d . h h ..s TOP~ 30m;fI
p aye Wit t e remaining [~ ~
minutes to expire. NO
3. Scroll to "YES" and press G to cancel. The ~
indicator will go out.
Notes: 1. If the timer expires during a call, the alarm
will ring after the call.
2. When you turn the power of~ the countdown
timer will be canceled.
3. See Alert Tone Volume Control (F31) on
page 57 to change the alarm sound volume.
4. In place of the alarm sound, you can use
Vibrator Alert (F8) on page 75.
Enhanced Roaming
Cellular systems are identified by a number called System
Identifier or SID. Your phone is equipped with a Preferred
Roaming List (PAL) which can be programmed by your
Carrier to take advantage of the families of cellular system
(SIDs) that your Carrier owns, or has special billing ar-
rangements with, in different cities.
In your Home System Area, both "~ " and "Am" are off in
your display. Outside of the Home System in Service Ar-
eas closely associated with your Carrier, the phone's dis-
play may appear the same as when operating in the Home
System.
65J
,"64