Filter
Top Products
Setting Tones (F36)
This is a group of 9 functions
related to the setting of tones.
~ 3e. 1 :'~~OJ~I~ ~
2:BEEP ~L T . t3: VOICEM~IL
Ring Type Selection (F32)
F:3:2
2. Press U or U to select the alert tone.
3. Press n to set.
Key Tone Length (F36-1)
This feature selects the duration of the tone length when
a key is pressed.
1. Press
G
-~ @ and rKEY TONE ~:: ~-
LENGTH
cD .IrVI~[.];:~~r~l.
SHORT
F36
~
Key Tone ~Iume Control (F33) ~
1.pressG@@. :--
~
"
~
KEY VOLUME
2. You can change the current mode by U or CJ .
3. Press G to set.
.NORMAL -Normal Mode
Tone is heard as long as the key is being pressed.
.SHORT- Short Mode
Tone is heard for a short time even if the key remains
pressed.
Single Alert Beep Tone (F36-2)
This feature is used to signal an incoming call with only
a single beep. This feature can only be used with the
"silent" alert mode. See Alert Tone Volume Control
(F31) on page 57.
1. Press G ~ (8 and IBEEP
f2-:::\ ~LERT
~. ON
LV~
J
2. You can turn this feature on/off by
3. Press ~ to set.
or(
To Mute a Phone Conversation (F34)
You can mute your conversation at any time during a call.
1. pressG~~.
2. Then the "Mute" indicator is displayed. The transmit
audio will be muted but the
L:=Jute receive audio will still be
heard from the receiver.
3. To return to normal conversation, press G ~
~ again.
4. Mute is reset when the call is terminated.
Voice Mail Alert (F36-3)
This feature audibly alerts you when a Voice Mail Noti-
fication is received. A Voice Mail Notification is received
if your Voice Mail contains messages that have not been
reviewed.
1. Press G @3~and .~---
~.
Sending DTMF (F35)
This feature allows you to activate or deactivate send-
ing DTMF (Touch ToneTM) when you enter a number
during a call.
1. pressG~~.
2. Scroll to "ON" or "OFF" to
select.
3. Press ~ to set.
;:""1MF SEND F3S
rVt!m ~
OFF
VOICEMAIL F36
~1 ALERT
rV'r!m ~
OFF
2. You can turn this feature on/off by (
3. Press ~ to set.
or
\.58
59J
This feature permits you to select an alert tone pattern
from 15 options including melody ringers.
1. Press ~ ~ ~ .rRIt:iG
TYPE
.v'I;t.~[~:I.."
RING#0:2
II
2. Keep pressing O or O until you achieve the
desired sound level, or "silent" mode.
Note: Key tone will be off in "silent mode", but tone will
be heard on the other side of the line.