Filter
Top Products
TO RECHARGE BATTERY
Your CDM-9000 has a built in charger function. To re-charge the Battery Pack, always install the Battery Pack to the
phone.
1. Attach the Battery pack to the Phone
2. Insert the DC plug of the AC Adapter (CNR-4000) to the Desktop Holder (DTH-4000). Plug the AC Adapter to AC
outlet.
3. Place the Phone with Battery Pack into the Desktop Holder.
4. Then the recharging starts. The display indicates “Now Charging” with animation. You can see a battery level
indicator scrolling at the upper-right of the display.
5. For complete recharging, it is recommended that the phone is turned off during recharging.
6. When the recharging is completed, the display indicates “Fully Charged”.
7. It is normal that Battery Pack may become a little warmer during recharging.
The charging time, from empty to full, depends on the environmental temperature, 0 to +35 °C.
Alternatively you can recharge the Phone using AC Adapter as illustrated below.
NOTE: Do not feed the power to the phone without Battery Pack
epyTyrettaB emiTgnigrahceR
-RTB(noImuihtiLmilS
)0004
h2-5.1
-ETB(noImuihtiLdednetxE
)0004
h5.3-5.2