Filter
Top Products
2. You can turn this feature on/off by or .
3. Press to set.
Clock Adjustment (F43)
You can use your clock in AUTO or MANUAL mode. In AUTO mode, your clock synchronizes to the base time of the
CDMA system and displays the local time of the area where you are, while the “D” indicator is on. In MANUAL mode,
your clock always works alone, and can be adjusted manually.
Example: To set the time to 9:15 a.m. Jul. 21, 2000 in MANUAL mode.
1. Press .
2. Scroll to “MANUAL” and press .
3. Enter the year , month , day , time and
for a.m. (or for p.m.)
4. Press to set.
Notes: 1. In the step 3 above, you can correct a digit by or , moving the cursor by or .
2. The clock works internally during power off, and will display the time in the same mode when you turn the
power on.
Clock Alarm (F44)
This feature alert you repeatedly at the alarm time that you programmed.
Example: To set the alarm time to 7:30 a.m.
1. Press .
2. Scroll to “ON” and press .
3. Enter the alarm time and for a.m. (or for p.m.)
4. Press to set. The indicator will be displayed.
5. At the alarm time, the alarm will ring for one minute with animation.
6. Press any key to stop ringing.
7. The clock alarm will repeat to ring every day until you cancel the feature.
Notes: 1. If it is a time to alarm during a call, the clock alarm will ring after the call.
2. The clock alarm does not ring during power off, but this feature will be activated again when you turn the