Filter
Top Products
BASIC OPERATION
Placing Calls
To place a call:
1. Enter the phone number.( a maximum of 32 digits will be displayed.)
2. Press .
The indicator will light.
· To Correct a Number
Press to clear the last digit.
Press and hold to erase all the digits entered.
· If the Call Fails to Go Through
Press , and to redial the number.
GETTING STARTED
Turning the phone On/Off
Press and hold . All the indicators and the digit display will light momentarily, and a tone will be heard. The
indicator will stay while the phone is turned on. To turn the phone off, press and hold .
Antenna Position
The antenna can be used in its fully extended or fully retracted position only. It is recommended that the antenna should
be fully extended for optimum performance and signal strength or while operating in poor signal areas.
Receiving Signal Strength Indicator
The number of lines indicates the Signal Strength in your area. Four lines show maximum level. The display will vary as
you move with the phone. If the signal is not strong enough to place a call, will appear on the LCD display.
Battery Level Indicator
You can always monitor the battery charge condition with the constant battery level indicator. The number of blocks
indicates the battery conditions as follows: