Filter
Top Products
4
Once the phone is ON, it will automatically search the network. When the
handset is registered in a network, the network name will be displayed on the
screen. You are now ready to make and answer calls.
If “Please insert SIM
card” appears on the display, turn the phone off by pressing and
holding the
. Following the instructions on page 2, remove the
battery and install your SIM card in the designated slot.
If a password or
PIN code is required, enter the correct password. For security purposes, the
code will not be visible as you type. Then, press the Left Soft Key
for
confirmation. After the phone is unlocked, the handset will indicate the name of
the registered network and the signal intensity.
Please contact your network supplier if you do not know your PIN code. The
handset default password is 1234
Switching OFF
To turn off the handset, press and hold the POWER key
.
The handset will be switched off after the log-off animation. Do not attempt to
switch off the phone by directly removing the battery. This may result in SIM card
memory loss.
Communication Control Keys
! CALL/ POWER Keys: Press the CALL key to answer an incoming call
and to make a call after entering the phone numbers. In standby mode,
press the CALL key
to display the latest call records (all answered,
missed and dialed calls, maximum 30 numbers). Press CALL
twice to
dial a selected record. Press POWER key to end a call or to return to
standby mode from menu. POWER
button also serves as power
on/off button when pressed and held for 2 seconds.