Filter
Top Products
10
Caller ID
IMPORTANT: In order to use this unit’s Caller ID features, you must subscribe to
either the standard Name/Number Caller ID Service or Call Waiting Caller ID Service
from your local telephone company.
This unit receives and displays information transmitted by your local phone company.
This information can include the phone number, date, and time; or the name, phone,
number, date, and time.
Your handset saves the numbers of the last 20 incoming calls in the call list. If the list is
empty, “EMPTY” is shown on the display.
New calls are signalled with the flashing icon.
Review / Dial back telephone numbers
The handset is in the idle state
Press the to open the call list. The name or the telephone number of the last call is
displayed.
To view number, date, and time of the call , press the button.
Press the button repeatedly, to view other entries.
Press the button, and the displayed telephone number is being dialled.
Enter the access code slowly after the beep (in delivery state “000”). You will hear two
short tones for confirmation.
You can now using the digit:
“2” - listen to the messages
During playback:
“2” - pause / proceed
“1” - repeat current message
“3” - skip to the next message
“11” - go to the previous message
“6” - stop playback
“7” - delete current message
“0” - delete all old mesages
“#” - record a message (Memo)
“4” - check the current OGM
“9” - select OGM /record new OGM
OGM selected:
“5” - start recording
“6” - stop recording
“8” - switch off answering machine (if it is set to on)
“9” - switch on answering machine (if it is set to off)
“6” - end remote operation
CID
MEMORY
CID
TALK
13
OK
MENU
OK
MENU
OK
MENU
OK
MENU
OK
MENU
/
/
/
pressing the button and enter the PIN (000 in delivery state).
Tone/Pulse
You can switch the dial mode. In most situations the TONE option should be selected.
Press the button. Select BASE using and press the button.
Using select DIAL MODE and press the button.
Using select TONE or PULSE and press the button.
OR
Press and HOLD the button for approximately 3 seconds. T (Tone) or P (Pulse)
appears in the display.
Press the button. Select HANDSET using and press the button.
Using select SELECT BASE and press the button.
Using select AUTO or MANUAL and press the button. If “MANUAL” is
selected, all bases the handset is subscribed to are shown. Select a base and press the
button.
Resetting the handset to (delivery state)
The handset will be reset to the delivery state - the entries in the phonebook, the caller list
and the redial list will be deleted.
Press the button. Select HANDSET using and press the button.
Using select RESET and press the button. Confirm the safety request by
/
/
/
/
/
OK
MENU
OK
MENU
OK
MENU
OK
MENU
OK
MENU
OK
MENU
OK
MENU
OK
MENU
Handset name
In the idle state the handset name and the internal telephone number is shown in the
display.
Press the button. Select HANDSET using and press the button.
Using select HANDSET NAME and press the button. Delete the old name
using . Enter the new name using the digit keys and press the button.
Key tone
The key tone is an acoustical confirmation for a pressed button.
Press the button. Select HANDSET using and press the button.
Using select KEYPAD BEEP and press the button.
Using select ON or OFF and press the button.
Selecting a base station
If the handset is subscribed to several bases you can select the active base. The setting
“AUTO” means, that the handset will automatically search for the base station with the
strongest signal (only in idle mode).
OK
MENU
OK
MENU
OK
MENU
OK
MENU
OK
MENU
OK
MENU
OK
MENU
OK
MENU
/
/
/
/
/
MUTE