Filter
Top Products
4
Telephone jack requirements
Modular Telephone
Line Jack
To use this phone, you must have an RJ11C modular telephone
jack. If you do not have a modular jack, please call your local
telephone company to find out how to get one installed.
Installation
Digital Security System
Your cordless phone uses a digital security system to protect against false ringing,
unauthorized access, and charges to your phone line.
INSTALLATION NOTE: Some cordless telephones operate at frequencies that may cause
or receive interference with nearby TVs, microwave ovens, and VCRs. To minimize or
prevent such interference, the base of the cordless telephone should not be placed near
or on top of a TV, microwave ovens, or VCR. If such interference continues, move the
cordless telephone farther away from these appliances.
Certain other communications devices may also use the 1.9 GHz frequency for communi-
cation, and, if not properly set, these devices may interfere with each other and/or your
new telephone. If you are concerned with interference, please refer to the owner’s
manual for these devices on how to properly set channels to avoid interference. Typical
devices that may use the 1.9 GHz frequency for communication include wireless
audio/video senders, wireless computer networks, multi-handset cordless telephone
systems, and some long-range cordless telephone systems.
Important installation information
● Base (x1)
● AC power adaptor (x3)
● Handset Charging unit (x2)
● Handset (x3)
● Handset battery pack (x3)
● Battery compartment cover (x3)
● Line cord (x1)
● User guide (x1)
In the box
● Avoid sources of noise and heat, such as motors, fluorescent lighting, microwave
ovens, heating appliances and direct sunlight.
● Avoid areas of excessive dust, moisture and low temperature.
● Avoid other cordless telephones or personal computers.
● Never install telephone wiring during a lightning storm.
● Never install telephone jacks in wet locations unless the jack is specifically designed for
wet locations.
● Never touch uninsulated telephone wires or terminals, unless the telephone line has
been disconnected at the network interface.
● Use caution when installing or modifying telephone lines.
19
● Answering system memory may be full. Erase some messages.
● You may have accidently pressed the play/stop button during playback and
stopped the message.
Won’t respond to remote commands
● You must use a tone-dial phone. This phone does not support pulse
(rotary) dialing.
● Make sure to enter the correct security code.
● Did unit hang up? If you take no action for a period of time, it automatically
hangs up.
Poor wireless reception (possible causes for poor reception)
● Aluminum siding.
● Foil backing on insulation.
● Heating ducts and other metal construction that can shield radio signals.
● You’re too close to appliances such as microwaves, stove, computers, etc.
● Atmospheric conditions, such as strong storms.
● Base is installed in the basement or lower floor of the house.
● Base is plugged into AC outlet with other electronic devices.
● Baby monitor is using the same frequency.
● Handset battery is low.
● You’re out of range of the base.
Product maintenance
To keep your unit working and looking good, follow these guidelines:
● Avoid putting the phone near heating appliances and devices that generate
electrical noise (for example: motors or fluorescent lamps).
● DO NOT expose to direct sunlight or moisture.
● Avoid dropping the unit and/or other rough treatment.
● Clean with a soft cloth.
● Never use a strong cleaning agent or abrasive powder because this will
damage the finish.
● Retain the original packaging in case you need to ship it at a later date.
● Periodically clean the charge contacts on the handset and base with a soft
cloth.