Filter
Top Products
3-1
3. WIRING OF OPTIONAL EQUIPMENT
3.1 NBDP Terminal DP-6
The NBDP Terminal connects to the REMOTE connector on the FS-1503. It has a remote
control function which automatically sets class of emission and frequency data at the FS-1503.
Remarks on connection
Connect the NBDP Terminal to the FS-1503 with a 13-pair twisted cable. For the cable with no
connectors, attach connector types SRCN (at FS-1503) and D-sub (at DP-6). For cable with D-
sub connector, connect the SRCN connector at the FS-1503 side.
Necessary parts, interconnection
Requires REMOTE-A Kit. Install the board following the illustration on page 3-3. Note that a
narrow bandpass filter is also available. For connection, interconnection diagram on page S-1.
Contents of REMOTE-A Kit OP05-82 (Code no. 005-939-810)
emaNepyT.oNedoCytQ
ETOMERBCP
7540P50089-048-5001
.yssArotcennoC
)rotcennocETOMER(
8290S50044-031-0001
3.2 DSC Terminal DSC-60
The DSC Terminal connects to the REMOTE connector on the FS-1503.
Remarks on connection
When both the NBDP Terminal and DSC Terminal are to be connected, connect them via the
Distributor DB-500.
Necessary parts, interconnection
Requires REMOTE-A Kit. Install the board following the illustration on page 3-3. Note that a
narrow bandpass filter is also available. See the interconnection diagram on page S-1.