Filter
Top Products
35
Getting Connected
GPRS/3G
Your mobile phone will be automatically configured to use your wireless service
provider’s GPRS/3G/EDGE/HSPA+ service (if available) when you turn on the phone
for the first time. Note that the SIM card must be inserted.
Checking the Network Connection
1. Touch > Settings.
2. Touch Wireless & networks > Mobile networks.
3. Touch Access Point Names or touch Operator selection > Network operators to
check the network connection.
Your mobile phone will automatically read the access point of the SIM card. For
this reason, do not change the parameters of the access point; otherwise, you
might not be able to access network sources.
Turning on the Data Service
1. Touch > Settings.
2. Touch Wireless & networks > Mobile networks.
3. Select the Data enabled check box to turn on the data connection.
Wi-Fi
Wi-Fi gives you wireless access to broadband Internet access. To use Wi-Fi on your
mobile phone, you need to have an access to wireless access points (hotspots).
Obstacles that block the Wi-Fi signal will reduce its strength.
Turning On Wi-Fi
1. Touch > Settings.
2. Touch Wireless & networks, and then select the Wi-Fi check box to turn on Wi-Fi.