Juniper Networks T1600 Cell Phone User Manual


 
DRAM 2048 MB
Memory utilization 8 percent
CPU utilization:
User 0 percent
Background 0 percent
Kernel 2 percent
Interrupt 0 percent
Idle 98 percent
Model RE-4.0
Serial ID P13004101110
Start time 2007-04-30 08:38:22 PDT
Uptime 2 days, 2 hours, 22 minutes, 43 seconds
Load averages: 1 minute 5 minute 15 minute
0.02 0.02 0.00
Exiting Upgrade Mode
Use the following commands to exit upgrade mode:
1. Enter configuration mode.
user@host> configure
2.
Delete the fabric upgrade-mode statement in the configuration at the [edit chassis]
hierarchy level.
user@host# delete chassis fabric upgrade-mode
3. Commit the configuration:
If GRES is enabled, commit the configuration on both the master and the
backup Routing Engines:
user@host# commit synchronize
If GRES is not enabled, commit the configuration on the master Routing
Engine:
user@host# commit
4. Exit configuration mode.
user@host# exit
34 Upgrading SIBs
T1600 Routing Node Upgrade Guide