Juniper Networks T1600 Cell Phone User Manual


 
Table 9: Technical Documentation for Supported Routing Platforms (continued)
DescriptionBook
Describes common configuration scenarios for the Layer 2 features
supported on the MX-series routers, including basic bridged VLANs
with normalized VLAN tags, aggregated Ethernet links, bridge
domains, Multiple Spanning Tree Protocol (MSTP), and integrated
routing and bridging (IRB).
MX-series Solutions Guide
Provides an overview of the network interface functions of the
JUNOS software and describes how to configure the network
interfaces on the routing platform.
Network Interfaces
Provides an overview of network management concepts and
describes how to configure various network management features,
such as SNMP and accounting options.
Network Management
Provides an overview of policy concepts and describes how to
configure routing policy, firewall filters, and forwarding options.
Policy Framework
Provides an overview of the JCS 1200 platform and the concept of
Protected System Domains (PSDs). The JCS 1200 platform, which
contains up to six redundant pairs of Routing Engines running
JUNOS software, is connected to a T320 router or to a T640 or
T1600 routing node. To configure a PSD, you assign any number
of Flexible PIC concentrators (FPCs) in the T-series routing platform
to a pair of Routing Engines on the JCS 1200 platform. Each PSD
has the same capabilities and functionality as a physical router,
with its own control plane, forwarding plane, and administration.
Protected System Domain
Provides an overview of routing concepts and describes how to
configure routing, routing instances, and unicast routing protocols.
Routing Protocols
Provides an overview of secure Common Criteria and JUNOS-FIPS
protocols for the JUNOS software and describes how to install and
configure secure Common Criteria and JUNOS-FIPS on a routing
platform.
Secure Configuration Guide for Common Criteria
and JUNOS-FIPS
Provides an overview of the services interfaces functions of the
JUNOS software and describes how to configure the services
interfaces on the router.
Services Interfaces
Describes the JUNOS software components and packaging and
explains how to initially configure, reinstall, and upgrade the JUNOS
system software. This material was formerly covered in the JUNOS
System Basics Configuration Guide.
Software Installation and Upgrade Guide
Describes Juniper Networks routing platforms and explains how
to configure basic system parameters, supported protocols and
software processes, authentication, and a variety of utilities for
managing your router on the network.
System Basics
Provides an overview and describes how to configure Layer 2 and
Layer 3 virtual private networks (VPNs), virtual private LAN service
(VPLS), and Layer 2 circuits. Provides configuration examples.
VPNs
JUNOS References
List of Technical Publications 49
List of Technical Publications