Filter
Top Products
T1600-SIBs
Figure 5 on page 9 shows a T1600-SIB.
Figure 5: T1600-SIB
Each T1600-SIB consists of the following components:
■ Switch fabric ASICs.
■ High-speed links to each FPC.
■ SIB online/offline button, located on the SIB faceplate.
■ Three LEDs located on the SIB faceplate that display the status of the SIB.
Table 4 on page 9 describes the functions of the SIB LEDs. If all three LEDs are
off, the SIB is not receiving power. The craft interface has three additional LEDs
that show the status of each T1600-SIB. The OK and FAIL LEDs are replicated on
the craft interface.
Table 4: SIB LEDs
DescriptionStateColorLabel
SIB is in active mode.On steadilyGreen
ACTIVE
SIB is functioning normally.On steadilyGreen
OK
SIB is starting up.Blinking
SIB has failed.On steadilyAmber
FAIL
Each SIB weighs approximately 6.5 lb (3 kg).
T1600 Upgrade Kit ■ 9
T1600 Upgrade Kit