Kyocera KX160B Cell Phone User Manual


 
14 Making and Answering Calls
Controlling network roaming
Specifying digital or analog mode
Depending on services available from your service
provider, you may set the phone to either digital
or analog mode. This is useful if you are in an
area that borders on digital service and the
automatic feature is causing the phone to keep
switching between modes.
1. Select Menu Settings Network
Digital/Analog.
2. Select an option and press .
Automatic automatically switches the
phone between digital and analog.
Analog only sets the phone to work in
analog mode only.
Analog call forces a call into analog mode
for the duration of the nextcall.
Digital only sets the phone to work in
digital mode only.
Turning roaming on or off
This setting allows you to control the phone’s
roaming feature by specifying which signals the
phone accepts.
1. Select Menu Settings Network
Roam Option.
2. Select an option and press .
Automatic (recommended setting)
accepts any system the phone
service provides.
No roaming prevents you from making
or receiving calls outside of your home
service area.
Note: If your phone has more than one setting for
Automatic, contact your service provider to
determine which one to use.
82-N8671-1EN.book Page 14 Tuesday, October 4, 2005 3:49 PM