Filter
Top Products
15
Charging the Battery
The battery charge level is shown at the top right of
the display.
When the battery charge level becomes low, the low
battery sensor will alert you by displaying the
screen icon and sounding an audible tone. If the
battery level becomes too low, the phone will switch
off and any function in progress will not be saved.
Batteries may be charged using the standard
QUALCOMM desktop charger, optional travel
charger, or cigarette lighter adaptor.
Using the Desktop Charger
Warning: Only use the desktop charger and AC adaptor
provided with the phone. Using the wrong adaptor may
cause damage.
1. Plug one end of the AC adaptor into the charger
holder and the other end into a wall outlet.
2. Insert either the battery pack alone or the phone
with installed battery pack into the slot. You
should then see a red light on the charger
indicating that the battery is being charged.
If completely discharged, the battery will charge in
approximately 5 to 6 hours. If you leave the phone
on while it is in the desktop charger, the battery
will take longer to charge.
You do not need to completely discharge the battery
before charging. Unlike other battery systems, there
is no memory effect which could degrade the battery
performance.
english 4/11/00, 11:09 AM15