Filter
Top Products
● aria 186/ 100/ 34E - DIGITAL KEY TELEPHONE SYSTEM USER GUIDE
22
Voice Announcement (Cont'd)
Button Procedures Range
Record paging message;
● Dial * 2 2 8.
● Lift handset to record your paging message.
● Press HOLD/SAVE button after recording.
Confirm paging message;
● Dial * 2 2 9.
● The paging message is heard.
Record Busy Greeting;
● Dial * 2 2 #.
● Lift handset to record your paging message.
● Press HOLD/SAVE button after recording.
Delete `Busy’ Greeting;
● Dial * 2 2 *.
● Confirmation tone is Herd.
Activate Call Forward to DVU,
● Lift handset or press MON button.
● Press DND/FWD button. (or dial 4 9 )
● Dial 7 or 8 (Select DVU forward type 1 or 2).
● Go on-hook.
Deactivate Call Forward to DVU,
● Lift handset or press MON button.
● Press DND/FWD button.
● Dial #.
● Go on-hook.
On LKD-2N/S, 8D/S,
● If a DVU message is left, the MSG lamp is flashing.
● Dial * 6 7 or programmed CALLBK button to listen to the
recorded message.
● The recorded message is heard and then the message is
automatically deleted.
● Pressing HOLD/SAVE button while a message is played, the
next message is heard. (The current message is placed to
the last. If on the last message, message will replay)
● Pressing programmed CALLBK button, the recorded message
is heard from the first.
● If you don’t press HOLD/SAVE button any more, the current
message is deleted and other messages are remained.
Listen to the recorded message,
● Press the flashing CALLBK button.
● The recorded message is heard with the time and date.
● Pressing HOLD/SAVE button, the current message is saved
and the next message is heard.
● Pressing CALLBK button, the recorded message is heard from
the first.
● Pressing CONF button, the current message is deleted.
※ The recorded caller’s message will not be erased without pressing CONF
button. But, the system power is off or system is reset, it will be erased.
※ The max. user recording time is about 250sec. (Default: 20sec: it can be
programmable with admin programming - PGM 44-BTN 16.)
System Features