LG Electronics 186 Cell Phone User Manual


 
aria 186/ 100/ 34E - DIGITAL KEY TELEPHONE SYSTEM USER GUIDE
24
CO Message Wait (CLI Message Wait)
Button Procedures
Range
When a call is received with DISA/DID, the Calling Line Identification (CLI) of the incoming call is
displayed on the LCD of the station. If the DISA/DID external party hangs up the call before
answered, the CLI will be stored in the CO message wait queue in the called party.
To retrieve CLI Message,
Press CALLBK button.
The stored message will be shown on the LCD.
To delete the current CLI message and see the next one,
Press CONF button.
To make a callback,
Press HOLD/SAVE button.
The stored number is dialed as speed dialing.
To see the next/previous CLI message,
Press VOLUME button.
To delete all CLI messages,
Press SPEED button twice.
If DVU message is stored with CLI message, the CLI message
will not be deleted by pressing SPEED button.
DISA (Direct Inward System Access)
Dial the CO access code after hearing dial tone or voice guide
from DVU.
Or, dial the CO access code after dialing the programmed
authorization code (when needed) for outgoing call.
Button Procedures
Outside caller can access a CO line which is programmed as DISA line.
Range
LCD Language Change
Button
Procedures
Range
Press TRANS/PGM button and dial 5 1
The language in LCD is changed into default value.
If pressing TRANS/PGM + 5 1, the language
in the LCD is changed to the nation’s language.
System Features
Button Procedures
Alarm Reset
Range
To terminate alarm signal while idle state,
Dial * 5 6 5.
Confirmation tone is heard and the alarm signal is terminated
at all assigned stations.