Filter
Top Products
C2500
19
Charge battery
• Connect the USB cable to the power jack on the bottom
of your phone.
• Connect the charger to an AC wall socket. The charging
icon is displayed briefly if the phone is switched on. If
the battery is completely empty, it may take a few
minutes before the charging indicator appears on the
display or any calls can be made.
!Warning:
If the battery is totally empty, charging icon or LED is not on.
Therefore, you should charge the battery maximum up to 7 minutes.
Personalizing your Phone
Setting clock
Within the Settings menu you can set the phone to display
the clock in the Idle mode and choose whether to use 12-
hour or 24-hour format.
Setting display language
In the Settings menu you can select the language in
which the display texts are shown.
Setting standby note
Within Standby note menu you can write a text, which is
displayed in the Idle screen.
Activating a profile
To access the list of profiles through the menu, press
Menu, then use Navigation key scroll to Profiles and
press OK. Press Option key to activate the certain profile
and press OK.
Personalise profile
• In the Idle mode press Menu, then use Navigation Key
to access Profiles.
• Choose Profiles from list of profiles, General, Vibrate
only, Silent, Outdoor, and Headset. Press Option to
personalise it.
• After choosing profiles, select
Personalise press OK.
Select the setting you want to personalise, you can
personalise the following settings of the selected profile:
• Tone setup: to set the ringing tone type for incoming call
or others.
• Volume: to set the volume level for the ringing and
keypad tones.