Filter
Top Products
19
Getting started
Turning your phone on and off
Turning your phone ON
1. Install a battery to the handset and connect the
phone to an external power source such as the
travel adapter, cigarette lighter adapter or hands-
free car kit. Or install a charged battery pack to
the handset.
2. Press and hold for a few seconds until the
LCD screen is turned on.
3. Depending on the status of the
PIN code request
setting you may need to enter your PIN code.
Turning your phone OFF
1. Press and hold for a few seconds until the
LCD screen is turned off.
Access codes
You can use the access codes described in this
section to avoid unauthorised use of your phone.
The access codes (except PUK and PUK2 codes) can
be changed by using the
Change codes
feature
(Menu 9.4.5). See page 64.
PIN code (4 to 8 digits)
The PIN (Personal Identification Number) code
protects your SIM card against unauthorised use.
The PIN code is usually supplied with the SIM card.
When the
PIN code request
is set to
Enable
, your
phone will request the PIN code every time the
phone is switched on. When the
PIN code request
is
set to
Disable
, your phone connects to the network
directly without the PIN code.
KG220 AUS(Optus)_0523 2006.5.24 1:58 PM Page 19