LG Electronics KT 610 Cell Phone User Manual


 
68
Settings
Settings
USB
You can change the device type to
which you normally connect your
phone with the USB cable. USB
mode
, Ask on connection.
Access points
You can view, create, and manage
access points. An access point is
where your phone connects to
the network by way of a data call
or packet data. To use e-mail and
multimedia services or to browse
web pages, you must first define
internet access points for these
services.
1. To create a new access point, press
the left soft key [Options] and
select New access point.
2. Scroll to the following
settings and press
to edit:
Connection name, Data bearer,
Dial-up number, User name,
Prompt password, Password,
Authentication, Homepage, Data
call type, Maximum data speed.
3. To save your settings, press the
right soft key [Back].
The icons on the left-hand side of
the access points indicate their data
bearers.
To edit an access point, scroll to it
and press
.
To delete an access point, scroll to it
and press
.
Note
For further information, please refer to
the Help option on the handset.
Packet data
You can set when to use packet data
connections and key in the access
point to be used if you use your
phone as a modem for a computer.
Packet data connection:
Define when to use packet data
connections.
Access point: If you use the phone
as a modem to enable packet data
connectivity from a computer,
scroll to this and press
. Key in
the access point name and press