Filter
Top Products
75
74
The G7050 has a built-in camera. It supports Zoom, Colour/Grey
settings, and Multi burst functions.
Take picture
Menu 8.1
Press the Menu key ( ) and select Camera Take picture.
Or, press the camera key ( ) in standby mode.
1. Focus on the subject to capture, then press the [OK] key or the
down side key.
2. “Saved
”
is displayed below the captured image. The captured
image is then automatically saved.
3. Press the [OK] key to continue taking pictures. Or press the right
soft key [Delete] to delete the image.
<Options before taking a picture>
You will see the following icons at the bottom of the preview screen.
1. Zoom: You can zoom in or out using up/down
navigation keys.
2. Color/Grey setting: Select Colour or Grey
mode by using the left/right navigation keys.
3. OK: Press the [OK] key to capture an image.
4. Memory bar: Shows the remaining memory.
If there is insufficient memory, the image size is
automatically reduced.
Camera
Menu 8
Note In the preview mode, you can immediately go to My photos
by pressing the left soft key [Photos].
5. OSD (On Screen Display): Press the up side key to check
the image size and the shot mode (sill shot or multi shot). Press
the up side key again to hide the display.
Multi burst
Menu 8.2
Press the Menu key and select Camera Multi burst.
You can take a series of pictures depending on the number of multi
bursts and the image size you set in the
Settings menu.
<Options before taking multi bursts>
You will see the following icons at the bottom of the preview screen.
1. Zoom: You can zoom in or out using the
up/down navigation keys.
2. Colour/Grey setting: Select Colour or Grey
mode by using the left/right navigation keys.
3. OK: Press the [OK] key to capture a series of
images.
4. Memory bar: Shows the remaining memory
and the set number of multi bursts. If there is
insufficient memory, the number of multi bursts
will decrease.
Note If the memory is full, “Memory full” is
displayed and you cannot take any more
picture. Create space by deleting old
images.
Note If the memory is full, “Memory full” is
displayed and you cannot take any more
picture. Create space by deleting old
images.
Camera