Filter
Top Products
101
100
Tools
Infrared
Menu 10.6
This feature allows you to send or receive data/fax through the
infrared port. To use an infrared connection:
• Install the modem driver for receiving or sending the data/fax.
• Install the network dial-up software supplied by your network
provider or fax application program for a fax call on your PC.
• Configure and activate an IrDA-compliant infrared port on your
PC.
• Activate the infrared feature on the phone; the symbol appears
on the right side at the bottom of the display.
• Call the network service number given to you by the service
provider.
If there is no communication between your phone and the IrDA-
compliant device within 30 seconds of activation of the feature, it is
automatically deactivated.
For further details, contact your network provider.
Note PC Sync is a program for data exchange between PC and
the phone by a data cable. Therefore, if you want to use this
function, you need to buy the accessory kit. For more
information, you can use the PC Sync Help file on the CD.
IrDA port
IrDA port
Please check to see if any problem which you may have with your
phone is described here before taking it for service or calling a
service engineer.
Q How do I view the list of outgoing calls, incoming calls and
missed calls?
A Press .
Q How do I clear all call history?
A Press the left soft key and then .
Q How do I view all numbers saved in the memory?
A Press the right soft key and then .
Q does not disappear from the screen.
A Check whether you are in a service area. If you continue to
see , turn off the power and wait for approximately 2 minutes
before turning it back on. If there is no change, relocate to
another area and check again.
Q Connection is poor or is not audible in certain areas.
A In certain areas, signal strength can vary dramatically. Try
moving to a different location. Heavy network traffic may affect
the ability to connect, or the stability of the call.
Q
&
A