Filter
Top Products
103
For Your Safety
102
Q Connection is poor even when established.
A In certain areas, signal strength can vary dramatically. Try
moving to a different location. Heavy network traffic my affect
the ability to connect, or the stability of the call.
Q LCD does not turn on.
A Remove and replace the battery and turn on the power. If the
phone still does not turn on, charge the battery and try again.
Q An echo can be heard during connection with a certain
telephone in a certain area.
A It is called “Echo Phenomenon”. It occurs if the volume is too
high or caused by special properties(semi electronic telephone
exchange) of the machine on the other end.
Q The phone gets warm.
A During long calls, or if games/Internet are used for a long time,
the phone may become hot. This is perfectly normal and has no
effect upon the life of the product or performance.
Q The bell does not ring, or lamp or LCD blinks only.
A The phone is set to “Vibrate” or “Silent” in the Profiles menu.
Please select “General” or “Loud”
Q&AQ&A
Q Standby duration of the phone gradually becomes shorter.
A Batteries have a limited life. When the battery lasts for half its
original time, it requires replacement. Only use authorised
replacement parts.
Q Usage time of battery becomes shorter.
A If the battery time is short, it may be due to the user
environment, or large volume of calls, or weak signals.
Q No number is dialled when you recall a contact entry.
A Check that the numbers have been saved correctly, by using
the Contact Search feature. Resave them, if necessary.
Q You cannot be contacted.
A Is your phone switched on ( pressed for more than three
seconds)? Are you accessing the right cellular network? Have
you set an incoming call barring option?
Q I cannot find the lock, PIN, or PUK code, or password?
A The default lock code is “0000”. If you forget or lose the lock
code, contact your phone dealer. If you forget or lose a PIN or
PUK code, or if you have not received such a code, contact
your network service provider.