LG Electronics G7050 Cell Phone User Manual


 
95
94
SettingsSettings
Network settings
Menu 9.7
The Network settings feature enables you to indicate whether
the network used when roaming(outside your home area) is
selected automatically, manually or preferably.
Automatic
(Menu 9.7.1)
Use this to set the phone to automatically search for and select one
of the cellular networks available in your area.
The phone will default back to Automatic if it is switched off.
Manual
(Menu 9.7.2)
If you want to select the desired network manually from a list of
network. If the connection to the manually selected network is lost,
the phone will sound an error tone and ask you to select a network
again. The selected network must have a roaming agreement with
your home network, that is, the operator whose SIM card is in your
phone. The phone will let you select another network if the phone
fails to access the selected network. If you switch off the phone, the
phone will be reset to Automatic.
Preferred
(Menu 9.7.3)
You can set a list of preferred networks the handset should attempt
to register with first, before attempting to register to any other
networks. This list is created from the handset s predefined list of
known networks.
Note You can select a network other than your home network only
if it has a valid roaming agreement with your home network.
GPRS settings
Menu 9.8
GPRS(General Packet Radio Service) is a technology that allows
mobile phones to be used for sending and receiving data over the
mobile network. GPRS is a data bearer that enables wireless
access to data network such as the Internet.
Before you can use GPRS technology
You need to subscribe to the GPRS service. For availability and
subscription to GPRS service, contact your network operator or
service provider.
You need to save the GPRS settings for the applications used
over GPRS.
GPRS Attach
(Menu 9.8.1)
If you select Power on and you are in a network that supports
GPRS, the phone registers to the GPRS network and sending short
messages will be done via GPRS. Also, starting an active packet
data connection, for example, to send and receive e-mail, is
quicker. If you select When needed, the phone will use a GPRS
connection only if you start an application or action that needs it.
The GPRS connection is closed after it is no longer required by any
application.
External device
(Menu 9.8.2)
When you use Internet via GPRS by using external device, you can
set the following six profiles: Rename, APN, IP address, DNS,
User ID, and Password.
Note If there is no GPRS coverage and you have chosen
Automatic, the phone will periodically try to establish a
connection.